Combination Drench Shower and Eye wash combines a safety shower and an emergency eye wash/face device. A water supply source can simultaneously flush the pollutants and harmful substances on the whole body, face and eyes.
Combination Drench Shower and Eye wash combines a safety shower and an emergency eye wash/face device. A water supply source can simultaneously flush the pollutants and harmful substances on the whole body, face and eyes.
Features
●Material: ABS plastic +304 stainless steel
●The pipe fittings and main parts are made of 304 stainless steel, which has good oil resistance, acid resistance, alkali resistance and salt solution.
●Pushing hand and foot switch can be arbitrarily selected to flexibly control the opening of the eye wash device, and the operation is convenient; the flush valve controlled by the shower lever can be opened and maintained in a constant state within one second, without relying on manual assistance to maintain
● Living water source
●Applicable to emergency elimination of body, eye and face chemical liquid splash accident hazard: shower is used for emergency showering chemical pollution of body parts, eye washer is used for emergency clear eye and face chemical pollution
● Meets the requirements of the American National Standards Institute/Industrial Safety Equipment Association for emergency eye wash and shower equipment ANSI Z358.1-2009
Model | WG7053FY | WG7053F | WG7050F | WG7050FY | |
Flow Rate(L/min) | Eye/Face Wash | 11.4 | 11.4 | 11.4 | 11.4 |
shower | 75.7 | 75.7 | 75.7 | 75.7 | |
Showerhead &Water Bowl | 304SS | - | √ | √ | - |
AES plastic | √ | - | - | √ | |
Valve(304SS) | 25mm (1") | √ | √ | √ | √ |
15mm (1/2") | √ | √ | √ | √ | |
Main Pipe | 38mm | 38mm | 38mm | 38mm | |
Eye/Face Wash Pipes | inlet | 15mm | 15mm | 15mm | 15mm |
outlet | 42mm | 42mm | - | - | |
bull horn | 18mm | 18mm | 18mm | 18mm | |
Shower Pipes | shower arm | 32mm | 32mm | 32mm | 32mm |
Quick Couplings | big | √ | √ | √ | √ |
small | √ | √ | √ | √ | |
Inlet | 1"BSPM | √ | √ | √ | √ |
Auxiliary Outlet | 1/2"BSPM | √ | √ | √ | √ |
G.W. /Kgs. | 12.2 | 12.4 | 9.6 | 9.5 | |
Weight /Kgs. | 9.2 | 9.4 | 7.6 | 7.5 | |
Recommended Minimum Fluid | Inlet | 25mm | 25mm | 25mm | 25mm |
Supply L/min | 150 | 150 | 150 | 150 | |
Pressure kPa | 210 | 210 | 210 | 210 |
Model | packing list | Outer Packing | Inner Packing-1 | Inner Packing-2 | Packing Type | G.W./Kg |
WG7053FY | pipes | 1200×400×265 | 330×330×130 | 220×220×100 | Carton | 12.2 |
WG7053F | pipes | 1200×400×260 | 330×330×130 | 220×220×100 | Carton | 12.4 |
WG7050F | pipes | 1200×400×265 | - | 220×220×100 | Carton | 9.6 |
WG7050FY | pipes | 1200×400×265 | - | 220×220×100 | Carton | 9.5 |