According to the work site hazardous chemicals to determine
When you use the site there are chlorides, fluorides, sulphuric acid or oxalic acid concentration is more than 50%, only spray back ABS stainless steel eye wash or using special high performance stainless steel eye wash. Because used stainless steel 304 material production of wash eye device, can anti-general situation Xia of acid, and alkali, and salt and oil class, material of corrosion, but cannot anti-chloride, and fluoride, and sulfuric acid or is concentration over 50% of oxalic acid of corrosion, in above material exists of work environment, using stainless steel 304 material production of wash eye device, not to six months time, wash eye device on will has is big degree Shang of damage. While using ABS injection plastic products this behavior does not occur.
ABS powder spray-new features: ABS powder adhesion is strong, 250-300 microns of thickness, corrosion resistance is strong.
Except in the South China region, other regions will appear in the winter 0 deg weather, so eye wash can have water, ice effect eye wash for normal use.
Eye washer inside the water problem to be solved, you must use an antifreeze-type eye wash.
1. Antifreezing eyewash is in use eye wash after the end or eye wash case in the standby state, emptying the whole eye-wash the inside of the water. Freezing eye washer has automatic emptying and emptying manually, under normal circumstances, with automatic emptying manually emptying