Flammable Corrosive Cabinet gets FM certificate，CE certificate; Accord with(OSHA) OSHA 29 CFR 1910.106 & (NFPA) NFPA CODE 30
SYSBEL Corrosive Cabinet:
1.Flammable Corrosive Cabinet gets FM certificate，CE certificate; Accord with(OSHA) OSHA 29 CFR 1910.106 & (NFPA) NFPA CODE 30
2.Double-wall construction with 38mm insulating air space for fire resistance.
3.Over 1.2mm thick, fully welded,construction holds squareness for longer life, offering greater protection in a fire.
4.87.5px leak tight sump at the bottom of cabinet’s maximally catches incidental drips.
5.Three-point latch door lock, easy to open and close 180 degree door with double key; optional padlock for double double lock safety management
6.Standardized warning label is highly visible and anti-corrosive.
7.The spill-proof laminate can be freely adjusted to effectively utilize the space of the safety cabinet.
8.The inside of the cabinet is sprayed with epoxy resin, and then treated with high temperature to prevent the chemical substance on the working site from being equipped with an adjustable fixing bar that can move up and down, so that the leakage prevention layer can be freely adjusted and the spacing is adjusted;
9.cabinet,reduce effects of corrosion and humidity.
10.2inches vents with integral flame arresters in both sides of every cabinet.
11.In terms of OSHA, on outside side panel,there is built-in grounding static connector for easy grounding.
Types of Corrosive Cabinets:
Shelf Loading Capacity(Kgs.)
Our Corrosive Cabinets are widely used in automotive manufacturing, petrochemical, industrial manufacturing, laboratory, food industry,power industry, new energy and other fields. We have been recognized by customers with good performance and high quality service .