Safety Can

SYSBEL Safety Can is a type of storage container for filling or pouring liquid through the same mouth. It is divided into type I and type II. The safety can is equipped with a flame that can effectively eliminate heat and prevent flashover. The automatic closed sealing cover of the safety can can effectively prevent spillage and leakage. The automatic pressure relief system of the safety can can automatically relieve pressure when the internal pressure is 0.2 ~ 0.35 m / cm2 (3 ~ 5 psi) to avoid accident Eruption or explosion hazard.

Product Details

Recently, a suspected explosion occurred at an abrasive material factory in Lianyungang, Jiangsu. Although it is found to be a fire, it is also quite dangerous. The risks are always at hand. Safety management is very important, and safe storage of products is also essential.SYSBEL Safety Can is a type of storage container for filling or pouring liquid through the same mouth. It is divided into type I and type II. The safety can is equipped with a flame that can effectively eliminate heat and prevent flashover. The automatic closed sealing cover of the safety can can effectively prevent spillage and leakage. The automatic pressure relief system of the safety can can automatically relieve pressure when the internal pressure is 0.2 ~ 0.35 m / cm2 (3 ~ 5 psi) to avoid accident Eruption or explosion hazard.


\


Product Features:
1. The fixed reel-shaped handle is used as a grasping and supporting point for the opening operation, and cooperates with the opening clip of the safety can to automatically close the sealing cover, and the sealing cover can be opened with one application of force. This design is easy to dump and carry;

2.2.5 gallons or 5 gallons are available for selection. The can body is made of 0.6mm galvanized steel and lead-free technology;


3. The top of the can body adopts a reinforced support shaft design and a ribbed design with a symmetrical structure in the center of the base, which is conducive to the balanced internal force of the tank body when the safety can is filled with liquid;

4. The self-closing sealing cover is affected by the spring force, which can effectively prevent overflow and leakage. Under the internal pressure environment of 0.2 ~ 0.35 kg / cm2 (3 ~ 5 lbs / square inch), this automatic pressure relief device can automatically discharge pressure to avoid accidental eruption or explosion;

5. Using lead-free epoxy resin paint, and the surface paint is bright, corrosion-resistant and moisture-resistant;

6. No joint design between the top of the can and the can body, higher leak-proof level;

7. The bottom seam adopts non-welding treatment;

8. A yellow label is used in the middle of the can to serve as a warning, and at the same time, the flammable product mark is clearly marked to improve the safety of use;


Application:
Factories, laboratories, enterprise workshops, etc.


Hot Tags: safety can, China, suppliers, manufacturers, factory, price, buy, for sale
Inquiry